Energy and carbon balances of wood cascade chains

In this study we analyze the energy and carbon balances of various cascade chains for recovered wood lumber. Post-recovery options include reuse as lumber, reprocessing as particleboard, pulping to form paper products, and burning for energy recovery. We compare energy and carbon balances of chains of cascaded products to the balances of products obtained from virgin wood fiber or from non-wood material. We describe and quantify several mechanisms through which cascading can affect the energy and carbon balances: direct cascade effects due to different properties and logistics of virgin and recovered materials, substitution effects due to the reduced demand for non-wood materials when wood is cascaded, and land use effects due to alternative possible land uses when less timber harvest is needed because of wood cascading. In some analyses we assume the forest is a limiting resource, and in others we include a fixed amount of forest land from which biomass can be harvested for use as material or biofuel. Energy and carbon balances take into account manufacturing processes, recovery and transportation energy, material recovery losses, and forest processes. We find that land use effects have the greatest impact on energy and carbon balances, followed by substitution effects, while direct cascade effects are relatively minor.     

森林植被在生态环境建设中的作用

本文对森林植被在生态环境建设中的作用进行了分折,指出森林植被建设是生态环境建设的重点,建议加快我因森林植被的建设与恢复,改善生态环境。     

Environmental regulatory compliance on army lands: A case study

A “finding of no significant impact” (FONSI) resulting from an environmental assessment (EA) was reported by the US Army in June 1986 for the construction and utilization of a multipurpose range complex (MPRC) at the Pohakuloa Training Area, Hawaii. There was little public response, and the US Fish and Wildlife Service and state agencies were consulted and had few comments concerning the results of the botanical surveys used in the assessment. Construction of the $24 million project was begun in 1988. Near the end of construction in 1989 a lawsuit was filed to halt construction because an environmental impact statement (EIS) had not been done for the project, and the plaintiff thought that significant damage had occurred to several unusual ecosystems. Judgment was against the plaintiff and construction continued. An appeal was filed with the 9th Circuit Court. As MPRC construction was nearly complete, and on advice of Department of Justice lawyers, the Department of Army agreed to settle out of court. The settlement in part called for: (1) the plaintiff to drop the appeal and allow construction to be completed as scheduled, and (2) the Department of Army to prepare an EIS for the operation of the MPRC. A subsequent botanical survey for the EIS discovered one endangered plant species, four category 1 candidate plant species (taxa with sufficient data to support listing as endangered or threatened), three category 2 candidate plant species (taxa with some evidence of vulnerability but insufficient data to support listing at this time), one category 3a species (presumably extinct taxa), and possibly three undescribed species growing within the MPRC boundary. The MPRC case study is an excellent example of why the National Environmental Policy Act (NEPA) must be modified to require in-depth and thorough environmental surveys.     

Visitor-induced changes in the chemical composition of soils in backcountry areas of Mt Robson Provincial Park, British Columbia, Canada

Balancing recreation and conservation is an important issue in Canada's parks and protected areas. Increased levels of visitation to parks, especially to backcountry areas, create undue pressure on natural resources, resulting in a variety of ecological impacts. This paper illustrates the issue of visitor-induced changes on the chemical composition of soils in Mt Robson Provincial Park, British Columbia. Soil samples were collected from dish wash stations and fire pits (disturbed sites) at seven campgrounds located along two popular backcountry trails, and were compared to samples obtained from adjacent undisturbed control sites. Analysis of soil samples suggest that the lower amounts of aluminum, potassium, magnesium and sodium in many of the 'disturbed' samples can be related to intense leaching in dish wash stations, and can be attributed to frequent disposal of waste water from washing and cooking activities. Soils in wash stations generally had higher phosphorus, copper and zinc contents as compared to controls. Soils in fire pits were elevated in copper, relative to controls. Results of this study support park regulations that waste water disposal and camp fires be restricted to designated areas. Informing the public of scientific studies helps them understand the consequences of their activities; this may help persuade them to observe park rules and regulations.     

明清时期南阳盆地的交通与城镇经济发展

交通是一个地区城镇经济发展至关重要的因素。明清时期 ,南阳盆地形成了以丹水、湍水、白河、唐河为主干的水路网和以方城路、三鸦路、商洛路、邓州路、桐柏路为主干的陆路网。盆地内星星点点的城镇分布其上 ,或通过水路 ,或依靠陆路 ,或水陆联动 ,以致货物聚集 ,商品经济迅速发展。后来 ,不少城镇则随着交通线路的兴衰而消长。探讨这一变迁过程 ,对于充分开发利用该区域的国土资源 ,进行合理的区域和城镇发展规划 ,促进当时经济建设 ,当有裨益。     

Using Multimedia Modeling to Expedite Site Characterization

GOAL, SCOPE AND BACKGROUND: This paper uses two case studies of U.S. Department of Energy nuclear weapons complex installations to illustrate the integration of expedited site characterization (ESC) and multimedia modeling in the remedial action decision making process. CONCEPTUAL SITE MODELS, MULTIMEDIA MODELS, AND EXPEDITED SITE CHARACTERIZATION: Conceptual site models outline assumptions about contaminates and the spatial/temporal distribution of potential receptors. Multimedia models simulate contaminant transport and fate through multiple environmental media, estimate potential human exposure via specific exposure pathways, and estimate the risk of cancer and non-cancer health outcomes. ESC relies on using monitoring data to quantify the key components of an initial conceptual site model that is modified iteratively using the multimedia model. CASE STUDIES: Two case studies are presented that used the ESC approach: Los Alamos National Laboratory (LANL) and Pantex. LANL released radionuclides, metals, and organic compounds, into canyons surrounding the facility. The Pantex Plant has past waste management operations which included burning chemical wastes in unlined pits, burying wastes in unlined landfills, and discharging plant wastewaters into on-site surface waters. CONCLUSIONS: The case studies indicate that using multimedia models with the ESC approach can inform assessors about what, where, and how much site characterization data needs to be collected to reduce the uncertainty associated with risk assessment. Lowering the degree of uncertainty reduces the time and cost associated with assessing potential risk and increases the confidence that decision makers have in the assessments performed.     

Application of Decision Analysis to Forest Road Deactivation in Unstable Terrain

Resource managers require objective methodologies to optimize decisions related to forest road deactivation and other aspects of road management, especially in steep terrain, where road-related slope failures inflict extensive environmental damage. Decision analysis represents a systematic framework that clearly identifies real options and critical decision points. This framework links current decisions with expected future outcomes and provides advantages such as a common currency to systematically explore the liability consequences of limited budget expenditures to road deactivation and other road-related activities. Furthermore, the decision framework prevents the analysis from becoming hopelessly entangled by the vast number of possibilities generated by the alternative occurrences, magnitudes, and consequences of landslide/debris flow events and provides the information required for the first step of an adaptive management process. Here, a structured analysis of potential environmental risks for a road deactivation project in coastal British Columbia, Canada is presented. The application of decision analysis generates a ranking of the expected benefits of proposed deactivation activities on various road sections. The ranking distinguishes between road sections that offer high expected benefit from those that offer moderate to low expected benefit. Seventeen of 171, 100–m road segments accounted for 18% of the cumulative cost and 98% of the cumulative expected net benefits from road deactivation. Furthermore, the cost of deactivating a section of road is related to the expected benefit from such deactivation, thus providing the basis for more effective resource allocation and budgeting decisions.     

Monitoring Forest Carbon Sequestration with Remote Sensing and Carbon Cycle Modeling

Sources and sinks of carbon associated with forests depend strongly on the management regime and spatial patterns in potential productivity. Satellite remote sensing can provide spatially explicit information on land cover, stand-age class, and harvesting. Carbon-cycle process models coupled to regional climate databases can provide information on potential rates of production and related rates of decomposition. The integration of remote sensing and modeling thus produces spatially explicit information on carbon storage and flux. This integrated approach was employed to compare carbon flux for the period 1992–1997 over two 165-km² areas in western Oregon. The Coast Range study area was predominately private land managed for timber production, whereas the West Cascades study area was predominantly public land that was less productive but experienced little harvesting in the 1990s. In the Coast Range area, 17% of the land base was harvested between 1991 and 2000. Much of the area was in relatively young, productive-age classes that simulations indicate are a carbon sink. Mean annual harvest removals from the Coast Range were greater than mean annual net ecosystem production. On the West Cascades study area, a relatively small proportion (< 1%) of the land was harvested and the area as a whole was accumulating carbon. The spatially and temporally explicit nature of this approach permits identification of mechanisms underlying land base carbon flux. Published online     

Geographic Analysis of Forest Health Indicators Using Spatial Scan Statistics

Geographically explicit analysis tools are needed to assess forest health indicators that are measured over large regions. Spatial scan statistics can be used to detect spatial or spatiotemporal clusters of forests representing hotspots of extreme indicator values. This paper demonstrates the approach through analyses of forest fragmentation indicators in the southeastern United States and insect and pathogen indicators in the Pacific Northwest United States. The scan statistic detected four spatial clusters of fragmented forest including a hotspot in the Piedmont and Coastal Plain region. Three recurring clusters of insect and pathogen occurrence were found in the Pacific Northwest. Spatial scan statistics are a powerful new tool that can be used to identify potential forest health problems.